POWER PRESS :

• Available in different varieties such as H - Frame Press, C - Frame Press, Cross Shaft Press, Friction Screw Press, Crank Less Press & Knuckle Joint Press.
  
  

• Available in Cast Iron & Steel Fabricated body with capacity ranging from 5 to 500 Tons.
  
  

• Machines with varied Bed Size & Stroke Length can be supplied on demand to suit operational requirement.
  
  

• Machines can be supplied with Pneumatic Clutch on demand.

:: Technical Specification of 'H' Frame Press in mm ::
CAPACITY IN TONS	10	20	30	50	75	100	150	200	250	300
Bed to Ram Bottom	200	228	275	305	330	380	455	508	550	600
Bed Size	280 x 330	330 x 406	381 x 431	457 x 508	560 x 560	585 x 635	685 x 735	785 x 810	865 x 915	915 x 1015
Stroke Length	50	55	63	80	90	100	145	150	150	175
Crank Shaft Dia	75	80	100	110	130	156	170	205	230	256
Gear Dia	430	560	610	660	765	865	965	1066	1170	1220
Fly Wheel Dia	540	570	685	765	835	965	1095	1200	1320	1420
Hole in Ram for Die Clamping	25.4	31.75	31.75	38.1	44.45	50.8	50.8	63.5	76.2	76.2
Floor to Top of Bed	735	735	735	735	735	735	735	735	735	735
No.'s of Strokes per minute	65	60	60	50	45	35	30	30	25	22
Overall Height without motor	1520	1765	1790	2000	2160	2340	2540	2900	3160	3430
Approx. Floor Area Required	762 x 635	762 x 686	838 x 686	1016 x 762	1016 x 762	1067 x 863	1600 x 1040	1600 x 1140	1750 x 1220	1900 x 1270
Power Required (1440 RPM)	2 H.P.	2 H.P.	3 H.P.	5 H.P.	7.5 H.P.	7.5 H.P.	10 H.P.	15 H.P.	20 H.P.	30 H.P.

:: Technical Specification of 'C' Frame Press in mm ::
CAPACITY IN TONS	5	10	20	30	50	75	100	150	200	250
Bed Size	220 x 330	325 x 435	355 x 510	432 x 585	510 x 760	600 x 850	660 x 915	720 x 980	900 x 1100	1000 x 1200
Bed to Ram Bottom	220	230	255	275	385	400	450	500	550	600
Stroke Length	40	50	55	63	80	90	100	145	150	160
Crank Shaft Dia	70	75	80	100	110	130	156	170	205	225
Gear Dia	365	430	560	610	660	765	865	965	1066	1170
Fly Wheel Dia	480	540	570	685	765	835	965	1095	1200	1270
Hole in Ram for Die Clamping	25.4	25.4	31.75	31.75	38.1	44.45	50.8	50.8	63.5	63.5
Floor to Top of Bed	760	760	760	760	760	760	760	760	760	760
No.'s of Strokes per minute	70	65	60	60	50	45	35	30	30	28
Overall Height without Motor	1320	1525	1730	1930	2135	2290	2500	2670	2950	3100
Approx. Floor Area Required	533 x 685	619 x 762	711 x 1116	762 x 1143	813 x 1219	914 x 1272	965 x 1397	1143 x 1425	1525 x 2006	1625 x 2050
Power Required (1440 RPM)	1 H.P.	2 H.P.	3 H.P.	3 H.P.	5 H.P.	7.5 H.P.	10 H.P.	15 H.P.	20 H.P.	25 H.P.

Also Available : Ball Press, Sheet Edging & Folding, Hydraulic Pipe Bending, Notching & Nibbling machines.

Rights to Alterations in Design, Weight & Specifications Reserved.