Silverton Corporation | Engineering Workshop Machineries | Pillar Drill | Cone Pulley Pillar Drill Machine

LOGIN :

PASSWORD :

All Geared Pillar Drill Machine

Automatic Nut Tapping Machine

Eastern Radial Drilling Machine

Hydraulic Power Hacksaw Machine

Cone Pulley Pillar Drill Machine

Automatic Nut Cutting Machine

C Frame Press Machine

H Frame Press Machine

EICO-JM-1 Geared Head Milling Machine

EICO-JM-4 All Geared Milling Machine

CONE PULLEY PILLAR DRILL || ALL GEARED PILLAR DRILL

PILLAR DRILL :

Available in different varieties such as All Geared Pillar Drill Machine (40mm & 50mm) & Cone Pulley Pillar Drill Machine (19mm, 25mm, 32mm & 40mm).
Critical parts like Gears, Shafts & Drilling Spindles are made of best quality alloy steel.
Other important parts like Base Plate, Arm Bracket & Working Table are made of seasoned graded Cast Iron.
All Gears of Auto Feed are duly hardened & all the main parts are Ground Finish.

:: Technical Specification of Cone Pulley Pillar Drill Machine ::

MODEL

EIC-1

EIC-2

Drilling Capacity (in steel)
19 mm 19 mm

Column Diameter
74.35 mm 74.35 mm

Center of Spindle to Column
200 mm 200 mm

Min. / Max. Spindle Nose to Table
500 / 700 mm 210 / 405 mm

Max. Spindle Nose to base

925 mm

640 mm

Taper in spindle

M. T. - 2

M. T. - 2

Spindle Travel

125 mm

125 mm

No. of speed / range

8 / 87 to 3200 RPM

8 / 87 to 3200 RPM

Table size

260 x 260 mm

260 x 260 mm

Base size (machined area)

260 x 235 mm

260 x 235 mm

Overall Base Size

480 x 300 mm

480 x 300 mm

Overall height with guard

1475 mm

1170 mm

V - Belt Section
A - 42 A - 42

Elec. Motor 1440 RPM
0.50 H.P. 0.50 H.P.

Wooden Case size L x W x H
700 x 400 x 1600 mm 700 x 400 x 1300 mm

Standard Accessories :

Motor Pulley, Auto Feed Attachments & Drift Key.

Optional Accessories :

Electric Motor, Reversible Switch, V-belt, Drill Chuck.

MODEL	EIC-3	EIC-4
Drilling Cap. (in steel)	25 mm	25 mm
Column Dia.	87.60 mm	87.60 mm
Centre of Spindle to Column	250 mm	255 mm
Max. Spindle to Table	600 mm	600 mm
Max. Spindle to Base	980 mm	1050 mm
Taper in Spindle	M.T. 3	M.T. 3
Spindle Travel	250 mm	185 mm
No. of Speed	8	8
Range of speed	73 to 1800 RPM	73 to 1800 RPM
Table Size	375 x 375 mm	345 x 345 mm.
Base Size (Machined area)	350 x 325 mm	350 x 325 mm
Overall Base Size	650 x 420 mm	650 x 420 mm
Overall Height With Guard	1675 mm	1675 mm
V - Belt Section	B - 52	B - 52
Elec. Motor - 1440 RPM	1 H.P.	1 H.P.
Wooden Case Size L x W x H	650 x 500 x 1525 mm	950 x 500 x 1525 mm

Standard Accessories :

Motor Pulley, Drift Key & Fine Feed Attachment

Optional Accessories :

Electric Motor, Reversible Switch, V-belt, Drill Chuck, Arbour fine feed attachment (expect in Model No. EIC-4).

MODEL	EIC-5	EIC-6
Machine Capacity	32 mm	40 mm
Column Diameter	114 mm	130 mm
Center of Spindle to Column	280 mm	305 mm
Distance Spindle to Table	625 mm	515 mm
Distance Spindle to Base	1045 mm	1040 mm
Spindle Nose	MT - 3	MT - 4
Spindle Travel	170 mm	215 mm
Range of Spindle Speed	75 to 2070 RPM	75 to 2070 RPM
No. of Spindle Speed	8	8
Range of Power Feed	Manual	Manual
Table Size	390 x 390 mm	435 x 435 mm
Base size (Machined area)	390 x 390 mm	490 x 470 mm
V - Belt Section	B - 58	B - 62
Overall Height With Guard	1745 mm	1830 mm
Main Electrical Motor	1.5 H.P.	1.5 H.P
Wooden Case L x W x H	1050 x 600 x 1900 mm	1140 x 650 x 1950 mm

Standard Accessories :

Motor Pulley, Fine Feed Attachment & Drift Key.

Optional Accessories :

Electric Motor, Reversible Switch, V-belt, Drill Chuck, Arbour, Coolant Pump with tank & fittings.

Technical Specification of All Geared Pillar Drill Machine :

Machine Capacity	40 mm	50 mm
Column Diameter	130 mm	195 mm
Center of Spindle to Column	305 mm	460 mm
Distance Spindle to Table	515 mm	580 mm
Distance Spindle to Base	1040 mm	1250 mm
Spindle Nose	MT - 4	MT - 5
Spindle Travel	215 mm	200 mm
Range of Spindle Speed	90 to 1000 RPM	48 to 675 RPM
No. of Spindle Speed	8	6
Range of Power Feed	(2) 0.08, 0.04	(3) 0.1, 0.2, 0.4
Table Size	435 x 435 mm	500 x 600 mm
Base size (Machined area)	490 x 470 mm	1170 x 655 mm
Overall Height With Guard	2130 mm
Main Electrical Motor	2 Speed: 1.75 / 2.5 H.P.	3 H.P.
Wooden Case L x W x H (approx)	925 x 650 x 2330 mm	1170 x 760 x 2650 mm

Standard Accessories :

Electrical Motor, Starter, Drift Key & Oil Can.

Optional Accessories :

Drill Chuck, Arbour, Coolant Pump with tank & fittings.

Also Available : Slotting Machine, All Geared Ram Turret Milling Machine, Vertical Milling-Cum-Drilling Machine, Cylinderical Grinder, Centreless Grinder, Bench & Pedestal Grinder, Capstan Lathes, Pillar & Bench Drilling, Abrasive Cut Off Machine & Tool & Cutter Grinder.

Rights to alterations in Design Weights & Specifications Reserved.

We are Manufacturers of Workshop Machinery, Suppliers of Workshop Machinery, Exporters of Workshop Machinery, Manufacturer of Engineering Workshop Machineries, Suppliers of Sheet Metal Machinery, Exporters of Sheet Metal Machineries, Supplier of Sheet Metal Machineries, Exporter of Sheet Metal Machineries, Supply Automobile Garage Equipments, Export Automobile Garage Equipment, Suppliers of Wire Industry Machineries, Exporters of Wire Industry Machines, Supplier of Wood Working Machineries, Manufacturer of Material Handling Equipments, Exporter of Material Handling Equipment from Kolkata, West Bengal, India. For any details feel free to contact Silverton Corporation, Kolkata, India. Our products are Lathes, Surface Grinders, Pillar Drill, Radial Drill, Planners, Power Hacksaw, Metal Cutting Bandsaw, Shaper, Milling Machine, Horizontal Boring Machine, Power Press, Guillotine Shearing Machine, Press Brake, Plate Bending Machine, Hydraulic Press, Diesel Fuel Pump Test Bench, Vertical Engine Head Grinder, Crankshaft Re-grinder Machine, Automatic Nut Tapping Machine, Automatic Nut Cutting Machine, Automatic Cold Thread Rolling Machine, Automatic Wire Nail Making Machine, Wire Drawing Machine, Wood Working Machineries and Material Handling Equipments.